Clearance: You offer a price
-
-
Unenco model: S.O.M-1000A. 120-277V, 60Hz. Max 900W at 120V. -
Please check the photos below and do your own research to figure out what they are for. We do not know about this.Only 1 left in stock -
It delivers at least 1 watt for a 1 milliwatt input, a gain of at least 30dB. Impedance 50 Ohms; Connectors: Type N femaleOnly 3 left in stock -
It delivers at least 1 watt for a 1 milliwatt input, a gain of at least 30dB. Impedance 50 Ohms; Connectors: Type N femaleOnly 1 left in stock -
Only 1 left in stockThe last two photos showing seven 50-870MHz dual amplifier modules (model: LL 870 DUAL AMP) will not be included in this sale, you can buy them at different store product code :EIP-AMP-011C. This mainframe can also accept Antec optical transmitter, optical receiver, optical amplifier modules, see example at Store Product Code: OTI-Tx-L-050C.
It requires 48V DC Power supply to drive it. We have verified: Connect power supply positive output to RTN+ pin of the mainframe, connect power supply negative output to -48V pin of the mainframe.
-
Dual amp 50-870 MHz
RF attenuator is adjustable
Slope is adjustable
P/N: 252953
This module will be removed from Antec Laser Link II systems, see last two photos showing 7 dual amplifier modules. -
Only 1 left in stockThe Sneeze Guard™ is used in hybrid assembly, research and development, testing, inspection, and all other microelectronics operations that involve microscopes. It hangs at the proper angle on most microscope eyepieces, shielding the work stage against contaminants emanating from the operator. Tests have shown that it functions as effectively as a face mask, without the inconvenience and expense.
The Sneeze Guard™ is available in both acrylic and Static-Dissipative PVC. The acrylic Sneeze Guard™ is economical, and in time generates a static charge that actually attracts contaminants, making this unit in effect a "contamination magnet."
The Static-Dissipative PVC model features a surface resistivity of 106-108
-
-
Provide bipolar 0-6 amps/phase. See maker website for more details including user guide at http://www.parkermotion.com/products/Stepper_Drive_Controllers__5332__30_32_80_567_29.htmlOnly 1 left in stock -
With sensor head: H99 T6. See new and similar model at the htm links belowOnly 1 left in stock -
With sensor head: H88 T6. See new and similar model at the htm links belowOnly 1 left in stock -
With sensor head: H87 T6. See new and similar model at the htm links belowOnly 1 left in stock -
-
-
The TE-1820 rack mountable hub provides high capacity connectivity for use in medium to large corporate networks. It is designed to meet EIA-19" rack mounting standards. In addition to the built-in RJ-45 ports, it provide connectivity for AUI and BNC as well. For added durability the TE-1820 is protected by a heavy gauge metal chassis. The TE-1820, functions as a multi-port repeater, handle collision processing, signal regeneration and transmitted signal pre-distortion function, and halt transmission in case of total loss of reception over a link.Only 1 left in stock -
See test data at the pdf link below.Only 1 left in stock -
Only 1 left in stockThe Adaptec AHA-2940W PCI-to-Fast SCSI host adapter provides a powerful multi-tasking interface between your computer's PCI bus and SCSI devices (disk drives, CD-ROM drives,scanners, tape backups, removable media drives, etc.).
Specifications:
Max. # Devices: 15
Bus Type: 32-bit PCI
External Connector: 68-pin SCSI-3
Internal Connector: 50 pin standard SCSI header & 68 Pin SCSI-3 header
Data Transfer Rate: 20 MBPs
Supported Protocols: SCSI-2 & SCSI-3 -
Only 1 left in stockPrecision Brand Feeler Gage is made from 1/2" wide spring steel stock, close grain C1095 high carbon steel.
The material is ground and polished to precision tolerances.
This product is used in manufacturing, maintenance, and tool & die operations wherever setting close spacing or checking extremely tight tolerances is required.
Thicknesses are clearly etched on each piece.
Each piece is individually wrapped for protection and convenience.
Ends are rounded and edges are smooth for safety.
Each piece has a 3/16" hole at one end except for .001", .040" , and .050" thickness . -
Only 1 left in stockPrecision Brand Feeler Gage is made from 1/2" wide spring steel stock, close grain C1095 high carbon steel.
The material is ground and polished to precision tolerances.
This product is used in manufacturing, maintenance, and tool & die operations wherever setting close spacing or checking extremely tight tolerances is required.
Thicknesses are clearly etched on each piece.
Each piece is individually wrapped for protection and convenience.
Ends are rounded and edges are smooth for safety.
Each piece has a 3/16" hole at one end except for .001", .040" , and .050" thickness -
Only 1 left in stock
Precision Brand Feeler Gage is made from 1/2" wide spring steel stock, close grain C1095 high carbon steel.
The material is ground and polished to precision tolerances.
This product is used in manufacturing, maintenance, and tool & die operations wherever setting close spacing or checking extremely tight tolerances is required.
Thicknesses are clearly etched on each piece.
Each piece is individually wrapped for protection and convenience.
Ends are rounded and edges are smooth for safety.
Each piece has a 3/16" hole at one end except for .001", .040" , and .050" thickness . -
Only 1 left in stockPrecision Brand Feeler Gage is made from 1/2" wide spring steel stock, close grain C1095 high carbon steel.
The material is ground and polished to precision tolerances.
This product is used in manufacturing, maintenance, and tool & die operations wherever setting close spacing or checking extremely tight tolerances is required.
Thicknesses are clearly etched on each piece.
Each piece is individually wrapped for protection and convenience.
Ends are rounded and edges are smooth for safety.
Each piece has a 3/16" hole at one end except for .001", .040" , and .050" thickness . -
Only 1 left in stock
Precision Brand Feeler Gage is made from 1/2" wide spring steel stock, close grain C1095 high carbon steel.
The material is ground and polished to precision tolerances.
This product is used in manufacturing, maintenance, and tool & die operations wherever setting close spacing or checking extremely tight tolerances is required.
Thicknesses are clearly etched on each piece.
Each piece is individually wrapped for protection and convenience.
Ends are rounded and edges are smooth for safety.
Each piece has a 3/16" hole at one end except for .001", .040" , and .050" thickness . -
Only 1 left in stockPrecision Brand Feeler Gage is made from 1/2" wide spring steel stock, close grain C1095 high carbon steel.
The material is ground and polished to precision tolerances.
This product is used in manufacturing, maintenance, and tool & die operations wherever setting close spacing or checking extremely tight tolerances is required.
Thicknesses are clearly etched on each piece.
Each piece is individually wrapped for protection and convenience.
Ends are rounded and edges are smooth for safety.
Each piece has a 3/16" hole at one end except for .001", .040" , and .050" thickness . -
Input: 48VDC. Output: 24VDCOnly 1 left in stock -
Max: 7KG. With test sheet and reference manual.Only 1 left in stock -
Cable assemply (6-feet SMA/RT ANGL-N). Just remind you it is not regular BNC male connector, it is reverse polarity BNC connector (female). Check more info in maker website: http://www.maxrad.com/product_category_detail.cgi?id_num=29&styleid=8 . See cable datasheet at http://wildcard.pctel.com/images_product_overview/pdf_docs/cable_data_sheet.pdf . See cable datasheet at http://wildcard.pctel.com/images_product_overview/pdf_docs/C,C,A,T_87-88.pdf -
Removed from Nortel OC-192 Transmitter card (Store Product Code: OMS-OC192-Tx-002 ). This is driver module for Nortel part: NTCR0050.Only 1 left in stock -
Low cost. Short-time or one-time use. Great for visitors, field service calls, or shipping with ESD sensitive products. The pdf link below is from different maker. -
Oven temperature controller made for Bookham (Nortel). At the back of the enclosure, there is small 2-slot yellow socket, it is for K-type Input (CHROMEGA-ALOMEGA thermo-couple), there is label of (K CHROMEGA-ALOMEGA).Only 2 left in stock -
-
50/125um, Corning Fiber Cable 12F SX+RIB.One 12-fiber male MTP connetor at each side.June 2001Only 2 left in stock -
50/125um, Corning Fiber Cable 12F SX+RIB.One 12-fiber male MTP connetor at each side.Aug 2001Only 5 left in stock
-
FPC9-ALX5-S-1M, with small factor connectors. Test sheet label in the photo below is only from a sample. -
We measured enclusure from outside, LxWxH=43.3x26.5x4.2cm (total length is 19 inch). Front penal of the enclosure is not included (see photos below). Avanex dispersion compensation module is not included. TELLABS P/N 81.071DCM-SHLF, CLEI: WMMHZ00BRA, REV A.Only 3 left in stock -
Only 2 left in stockIt is large metal enclosure. Previouse owner installed 2 fiber spools inside by strong double-side tape. 2 fiber spools were removed by us. Size(WxDxH):48x38x27cm.
You may install 2 or even 3 fiber spools. It only accept 4-inch net-height low-version spool, it cannot accept more than one 8-inch net-height high-version spool). It does no includes any mechanical parts to support fiber spools. We do not have time to install fiber spools for you.
You can also use it for other project.
-
-
3 samples tested 25dB +/-1dB @1.3/1.55um SMF. Air-gap type, so RL=-14.7dB. About 200pc available in Nov 2006. -
one end SC/PC, another end SC/APC connector, SM fiber. Two units per box. Price is for one unit. Dimensional weight is for 2pc in one case.
-
one end SC/PC, another end SC/APC connector, SM fiber. Two units per box. Price is for one unit. Dimensional weight is for 2pc in one case.
-
one end SC/PC, another end SC/APC connector, SM fiber -
Fixed 6 dB loss, SMF, SC/APC connectors, simplex 3mm cable. AL/FOCUS P/N: SJ-40N1N1-1-00.4-6dB@1550nm. One sample was tested about 6dB in our lab. -
About 1%/99% coupling ratio. with 250um-coating SM bare fiber pigtails(long enough), no connectors. 2-sample test data at our lab: ~22dB@1.28um, ~18dB@1.53um, sample test IL includes 1 connector and 2 splice losses. Price is for one unit. Only sell in pair. Easy to fusion-splice. -
Only 1 left in stockSee photos for actual item.
-
-
-
OC-192 enclosure/frame to hold up to 18 cards, w/ fan unitsOnly 2 left in stock -
With connectors,large 2-side PCB, two power supply filter units (inside of left corner of photo), 20kgOnly 2 left in stock -
OC-192 enclosure/frame to hold up to 18 cards, with more parts.Only 2 left in stock -
OC-192 enclosure/shelf loaded with cards, with fan unitsOnly 1 left in stock -
-
-
OTDR fiber test range: 2km, 8km, 16km, 32km (64km range is actually not working well probably due to less output power, so normally you cannot use this instrument to test more than 32km fiber spool) . 22kg net weight.No user manual. We used it to test fiber length at our lab for several years. We sell it because we got another one for longer and also shorter fiber length test.Only 1 left in stock -
