New-Arrived (dual category)

Female to female, square shape. Zirconia internal split sleeve, so it is designed for SMF, but you can also use it for MMF.  The Replacement RoHS Compliant Part Number of new model is 1061520000 (see pdf link below).

We measured more than 10 samples, average key width is mostly between 2.25mm and 2.33mm, average key width is near 2.3mm. (Worst-case may be approximately between 2.21mm and 2.35mm). We measured 8 adapter samples with 8 SM fiber jumpers (JDS P/N: J-FPFP-A-005-JT, Store product code: FPC-SX-SMJUMPER-FC-240C), average insertion loss is 0.07dB at 1543nm.

Two different product packages are available. Only small qty is available for the package type of last two photos below.

If you need mount it in front panel, we can provide two screws and nuts for each adapter.

Female to female, square shape. Zirconia internal split sleeve, so it is designed for SMF, but you can also use it for MMF.  The Replacement RoHS Compliant Part Number of new model is 1061520000 (see pdf link below).

We measured more than 10 samples, average key width is mostly between 2.25mm and 2.33mm, average key width is near 2.3mm. (Worst-case may be approximately between 2.21mm and 2.35mm). We measured 8 adapter samples with 8 SM fiber jumpers (JDS P/N: J-FPFP-A-005-JT, Store product code: FPC-SX-SMJUMPER-FC-240C), average insertion loss is 0.07dB at 1543nm.

Two different product packages are available. Only small qty is available for the package type of last two photos below.

Female to female. Without screw nut. With 2 dust caps. Senko P/N: 298-204. See specification at the 1st pdf link below.

ADAPTER TYPE: FC Oval Adapter. Sleeve: Metal Straight Split

Features:
• High Density Oval type
• Typical insertion loss under 0.05dB and Max IL of 0.20dB
• High quality and durable Ni-Plated Brass bodyKey width is about 2.24mm, tested on 3 samples by micrometer at our lab (Not 2.05mm narrow key, not 2.4mm wide key).

This key width is for general FC/PC connectors. Designed for SMF, but also suitable for MMF. Female to female.

Female to female. Without screw nut. With 2 dust caps. Senko P/N: 298-204. See specification at the 1st pdf link below.

ADAPTER TYPE: FC Oval Adapter. Sleeve: Metal Straight Split  

Features:
• High Density Oval type
• Typical insertion loss under 0.05dB and Max IL of 0.20dB
• High quality and durable Ni-Plated Brass bodyKey width is about 2.24mm, tested on 3 samples by micrometer at our lab (Not 2.05mm narrow key, not 2.4mm wide key).

This key width is for general FC/PC connectors. Designed for SMF, but also suitable for MMF. Female to female.

Bronze internal split sleeve, so it is economical solution for many popular applications. You may need change to adapter with ceramic sleeve instead if you need high repeatability and durability and compatibility such as in instrumentation.

Female to female. Without screw nut. With 2 dust caps. Phos. For both SMF and MMF.

Senko P/N: 298-202. See specification at the 1st pdf link below.
ADAPTER TYPE: FC Oval Adapter “HD”,
Sleeve: Metal Straight Split
Key width: For APC Connector 2.05+/-0.02

Features:
• High Density Oval type
• APC type Adapter have Narrow key of 2.05mm
• Typical insertion loss under 0.05dB and Max IL of 0.20dB
• High quality and durable Ni-Plated Brass body

The packing box label shows vendor name is Senko Advanced Components, Inc with P/N: AF3A-P and pencil mark of P/N: 298-202, and the quality control certificate shows vendor name is Senko Advanced Components, Inc  with P/N: 298-202. But the JDS catalog at last pdf link below shows this P/N: AF3A-P is for Seikoh Giken. It seems Senko manufactured them, then Seikoh Giken imported and supplied them to JDS in Canada. See short description and original retail price of year 2000 at the 1st page of last pdf link below (from JDS catalog).

PHOSPHOR BRONZE internal sleeve, it would be same as 2nd pdf link below.  It can be used for both SMF and MMF. Samples are verified very good for SMF.  Phosphor Bronze Split Sleeves are an economical solution for applications where tremendous durability and repeated connect / disconnect operations are not required. Seikoh Giken USA Inc. told us:  the insertion loss performance is nearly the same good as Zr internal sleeve unless you use it too many times, for example, >500 mating times.

Bronze internal split sleeve, so it is economical solution for many popular applications. You may need change to adapter with ceramic sleeve instead if you need high repeatability and durability and compatibility such as in instrumentation.

Female to female. Without screw nut. With 2 dust caps. Phos. For both SMF and MMF.

Senko P/N: 298-202. See specification at the 1st pdf link below.
ADAPTER TYPE: FC Oval Adapter “HD”,
Sleeve: Metal Straight Split
Key width: For APC Connector 2.05+/-0.02

Features:
• High Density Oval type
• APC type Adapter have Narrow key of 2.05mm
• Typical insertion loss under 0.05dB and Max IL of 0.20dB
• High quality and durable Ni-Plated Brass body

The packing box label shows vendor name is Senko Advanced Components, Inc with P/N: AF3A-P and pencil mark of P/N: 298-202, and the quality control certificate shows vendor name is Senko Advanced Components, Inc  with P/N: 298-202. But the JDS catalog at last pdf link below shows this P/N: AF3A-P is for Seikoh Giken. It seems Senko manufactured them, then Seikoh Giken imported and supplied them to JDS in Canada. See short description and original retail price of year 2000 at the 1st page of last pdf link below (from JDS catalog).

PHOSPHOR BRONZE internal sleeve, it would be same as 2nd pdf link below.  It can be used for both SMF and MMF. Samples are verified very good for SMF.  Phosphor Bronze Split Sleeves are an economical solution for applications where tremendous durability and repeated connect / disconnect operations are not required. Seikoh Giken USA Inc. told us:  the insertion loss performance is nearly the same good as Zr internal sleeve unless you use it too many times, for example, >500 mating times.

Female to female. With 2 dust caps. Zirconia internal split sleeve, so it is designed for SMF, but you can also use it for MMF. Made for JDS. See short description and original retail price of year 2000 at the 1st page of pdf link below (from JDS catalog).

Mounting method: apply two screws over flange holes and panel holes.

Female to female. With 2 dust caps. Zirconia internal split sleeve, so it is designed for SMF, but you can also use it for MMF. Made for JDS. See short description and original retail price of year 2000 at the 1st page of pdf link below (from JDS catalog).

Mounting method: apply two screws over flange holes and panel holes.

BSC2 (BSCII,BSC-II, BSC-2) back panel adapter. Female to female. With 2 dust caps. Zirconia internal split sleeve, so it is designed for SMF, but you can also use it for MMF. Made for JDS.

We have tried, it can accept both BSC2/APC connector and regular SC/APC connector.

Description: BSCII Backplane Adapter, APC, Green Body, Ceramic Alignment Sleeve, Spring Clip to Plate Mount Style, 4, 2, 1

Female to female, green color plastic housing, angled endface. With 2 dust caps. Maker: Senko Advanced Components, Inc., made for AFL Telecommunications. Country of Origin: Taiwan.

See general description of this SC/APC adapter at last page of the 1st pdf link below (full AFL product catalog available upon request). Also see page 11 of last pdf link below for similiar model.

SC/APC connection loss specification of AFL telecommunications systems (see page 5 of 1st pdf link below):
•  Insertion loss: maximum  0.25 dB, typical 0.15 dB
•  Return Loss: maximum  -65 dB, typical -68 dB
•  Durability: 200 cycles
•  Operating Temperature -40°C to + 85°C
•  Storage Temperature -40°C to + 85°C

Mounting method: apply two screws over flange holes and panel holes. We verified key width is narrow.

Female to female, green color plastic housing, angled endface. With 2 dust caps. Maker: Senko Advanced Components, Inc., made for AFL Telecommunications. Country of Origin: Taiwan.

See general description of this SC/APC adapter at last page of the 1st pdf link below (full AFL product catalog available upon request). Also see page 11 of last pdf link below for similiar model.

SC/APC connection loss specification of AFL telecommunications systems (see page 5 of 1st pdf link below):
•  Insertion loss: maximum  0.25 dB, typical 0.15 dB
•  Return Loss: maximum  -65 dB, typical -68 dB
•  Durability: 200 cycles
•  Operating Temperature -40°C to + 85°C
•  Storage Temperature -40°C to + 85°C

Mounting method: apply two screws over flange holes and panel holes. We verified key width is narrow.

female to female,  for both SM and MM fiber. Metal housing, Ceramic internal sleeve. with screw nut, washer, and caps. Date of MFG: 03/15/2005.

ST Single-Mode adapters are bayonet-action adapters designed to accept ST Single-Mode connectors.

Universal Modular Adapter Family: LC Clothespin Base and Cap. Flexibility in a 2-Piece Adapter System. Allows cleaning the behind-the-wall connector from the front of the panel.

Female to female, made from plastics. It comes with black cover, so can be used permanently.

Panel mounting method: Snap in.

Product Highlights:
• Coupling Adapter
• Singlemode
• Ceramic Alignment Sleeve Material
• Color = Blue
• Adapter Style = Quad

Female to female, with 2 dust covers. Key width is about 2.15mm, we verified this over 4 samples by micrometer at our lab. Snap-in flange. Service life: min 500 cycles. Temperature range: -25°C to +70°C. Typical insertion loss is 0.12dB if using Huber+Suhner connectors (see details at zip link below). 

Price is for one adapter. You will get original box if you buy 100pc.

Female to female, with 2 dust covers. Key width is about 2.15mm, we verified this over 4 samples by micrometer at our lab. Snap-in flange. Service life: min 500 cycles. Temperature range: -25°C to +70°C. Typical insertion loss is 0.12dB if using Huber+Suhner connectors (see details at zip link below). 

Price is for one adapter. You will get original box if you buy 100pc.

The cover is for panel hole (cutout) of standard-size simplex SC (PC or APC) or duplex LC adapter. When panel hole is unused and not occupied by simplex SC (PC or APC) or duplex LC connector, you can snap the cover into the panel hole. See last 3 photos below to understand how this cover to plug in the panel hole. The panel and adapter in last 3 photos below are not included in the sale.

The last two photos showing seven 50-870MHz dual amplifier modules (model: LL 870 DUAL AMP) will not be included in this sale, you can buy them at different store product code :EIP-AMP-011C. This mainframe can also accept Antec optical transmitter, optical receiver, optical amplifier modules, see example at Store Product Code: OTI-Tx-L-050C. 

It requires 48V DC Power supply to drive it. We have verified: Connect power supply positive output to RTN+ pin of the mainframe, connect power supply negative output to -48V pin of the mainframe.

Dual amp 50-870 MHz  
RF attenuator is adjustable
Slope is adjustable
P/N: 252953

This module will be removed from Antec  Laser Link II systems, see last two photos showing 7 dual amplifier modules.

The SCB-68 is a shielded I/O connector block for interfacing I/O signals to plug-in DAQ devices with 68-pin connectors. Combined with the shielded cables, the SCB-68 provides rugged, very low-noise signal termination.The SCB-68 is compatible with single and dual connector M Series devices with 68-pin connectors. The connector block is also compatible with most E, B, S, and R Series DAQ devices.

• Screw terminals for easy I/O connections or use with the CA-1000
• Shielded I/O connector block for use with 68-pin M, E, B, S, and R Series DAQ devices
• Onboard cold-junction compensation sensor for low-cost thermocouple measurements
• 2 general-purpose breadboard areas
• For highly accurate thermocouple measurements, use SCC or SCXI signal conditioning

Price is for one bag 100pc.

Low ESR: Max impedance at 100KHz at 20 C : 0.3 OHM.

Part Number: ECA1AFQ181
Manufacturer: PANASONIC
6.3mm diameter, 11.2mm length.
• capacitance: 180 uf
• voltage: 10 v
• tolerance: 20
• temperature: 105
• package: bulk
• diameter: 0.2500 IN, length: 0.4600 IN

Low ESR: Max impedance at 100KHz at 20 C : 0.022 OHM.

Part Number: EEUFC1E272B
Manufacturer: PANASONIC
16mm diameter, 25mm length.

Mounting Through Hole  
Capacitance Value 2700 uF  
Voltage 25 Vdc  
Tolerance 20 %  
Ripple Current 2555 mA  
Lifetime 5000 h  
Product Diameter 16 mm  
Product Height 25 mm  
Lead Pitch For Radial 7.5 mm  
Operating Temperature -55 to 105 °C  
Termination Style Radial  
Category Capacitor Aluminum  
Manufacturer Panasonic

Hakko 493 Smoke Absorber ESD Safe. 

The Hakko 493 is designed to remove all the noxious fumes created by the compounds used in soldering quickly, safely and efficiently. The replaceable filter is composed of specific urethane foam and refined, activated high absorption carbon. The fan is fully adjustable, quiet and efficient. The Hakko 493 is ESD safe by design. 

The Hakko 493 Smoke Absorber is a portable smoke eater. Soldering work involves both metallic and organic compounds; the solders themselves, and the fluxes necessary for soldering. These compounds release noxious fumes when heated, fumes which can lead to both short and long term operator irritations and illness if not properly handled. The HAKKO Smoke Absorber is an excellent answer to the problem of how to deal with these fumes. Put one of these units directly behind the solder station work area and literally watch the problem float away. 

Features : 

• Efficiently remove noxious fumes quickly, safely, and efficiently. 

• Urethane foam filter with refined, activated, high-absorption carbon. 

• The fan is fully adjustable, quiet, and efficient. 

• ESD safe by design. 

Specifications : 

• Model : 493 

• Power Consumption : 17W • Absorption Capacity: o (w/o filter) Approx. 1.07m³/min. (37.79 ft³/min.) 

• Outer Dimensions : o 220(W) x 270(H) x 168(D) mm o (8.7(W) x 10.6(H) x 6.6(D) in.) 

 Weight : 1.5 kg (3.3 lbs.) 

• Accessories : Filter (3 pcs) We may have extra one for sale.

The Sneeze Guard™ is used in hybrid assembly, research and development, testing, inspection, and all other microelectronics operations that involve microscopes. It hangs at the proper angle on most microscope eyepieces, shielding the work stage against contaminants emanating from the operator. Tests have shown that it functions as effectively as a face mask, without the inconvenience and expense. 

The Sneeze Guard™ is available in both acrylic and Static-Dissipative PVC. The acrylic Sneeze Guard™ is economical, and in time generates a static charge that actually attracts contaminants, making this unit in effect a "contamination magnet." 

The Static-Dissipative PVC model features a surface resistivity of 106-108

The fiber lightguide is not original and its diameter is a slightly smaller than original, but you can use it and you can approve it by filling in some soft material.

MODEL 180 - Standard 150 Watt, 115 VAC Illuminator, A3739P Ringlight, SX 10 Adapter /360-1 RL System

The Model 180 is a 150 Watt quartz halogen illuminator that can deliver upwards of 40,000 foot-candles of high intensity, cold illumination. It was specifically designed to be durable with the lowest possible audible noise and vibration levels typically required in most machine vision applications. The unit is compatible with all of the Fiber-Lite® standard and custom fiber optic light guides and is UL listed and CSA approved (Adapters required with mostfiber cables) 4.23

FEATURES:
110 or 220 VAC 50/60 Hz
Durable with low audible
noise (25dB) and vibration
levels
Rheostat controlled
intensity, 50-100%
40,000 footcandles of
high intensity, cold
illumination
Uses EKE lamp with
optional EJV lamp for
higher output
UL listed and CSA
approved
TECHNICAL INFORMATION:
Lamp:=EKE, 21 Volt, 150 watt/ EJV, 21 Volt, 150 watt
Lamp Life:=200 hours at full intensity/ 40 hours at full intensity
Color Temperature:=EKE 3250 degrees K,   EJV 3350 degrees K
Intensity Control:=Reheostat 50-100%
Voltage:=110/120 VAC, 50/60 Hz or 220/230 VAC, 50/60 Hz
Fuse:=2.5A 250V 3AG slow blow (115 VAC), 1.25A 250V 3AG slow blow (230 VAC)
Noise Level:<25dB
Safety Approvals:UL, CSA
Dimensions:=5.87" x 6.5" x 9"
Weight:=9 Lbs.
Adapters:=A type adapter series
Housing Temperatures:
EKE, 21 Volt, 150 Watt EJE, 21 Volt, 150 Watt
200 Hrs. at full intensity 40 Hrs. at full intensity
3200K 3400 K
Reheostat 50-100%
110/120 VAC, 50/60 Hz, 220/230 VAC, 50/60 Hz
2.5A 250V 3AGslow blow (115 VAC)
1.25A 250V 3AGslow blow (230 VAC)
25 db
UL, CSA
5.87" x 6.5" x 9"; 14.9 x 16.5 x 22.9 cm
9 lbs.
A-type adapter series
100 F (37.8 C)

NI PCI-232/4 (RS232)
Legacy 4-Port RS232 Serial Interface for PCI
Discontinued: The NI PCI-232/4 is no longer available. NI recommends the NI PCI-8430/4.
Legacy 4-port RS232 interface for Windows Me/9x/NT and LabVIEW Real-Time
Standard baud rates up to 115.2 kbits/s (1 Mbit/s with PCI-8430/4)
64 B transmit and receive FIFOs (128 B with PCI-8430/4)
Handling of RTS/CTS hardware handshake lines
10P10C (RJ50) connectors; requires 4 10P10C to DE9M (DB9) cables (included with PCI-8430/4)

The National Instruments PCMCIA-GPIB is a low-cost, high-performance IEEE 488 interface for computers with PC card (PCMCIA) slots, such as laptop and notebook computers. The NI PCMCIA-GPIB+ combines the circuitry of a PCMCIA-GPIB controller with a GPIB analyzer, making it ideal for troubleshooting GPIB applications. The PCMCIA-GPIB, a Type II PCMCIA card, is compliant with PCMCIA PC Card Standard Version 2.1 and above. The PCMCIA-GPIB is also compatible with the Plug and Play standard. The system automatically configures the PCMCIA-GPIB on startup or when you insert the card. The National Instruments TNT4882C ASIC makes the PCMCIA-GPIB a maximum-performance IEEE 488.2 interface. 

See more technical info at the pdf link below.

2001-TCSCAN 9-Channel (from ch2 to ch10) Thermocouple / General Purpose Scanner
Card with Test Leads for Models 2000, 2001, 2002, and 2010 Multimeters

Description:
The HP 3478A is a low cost, full function, reliable DMM for system measurements. Selectable 3'/2 to 5 1/2 digit resolution and 5 autoranging functions offer flexibility in automated testing. The HP 3478A measures dcV, true rms acV, 2- and 4-wire resistance, and dc and ac current. Simple, fast electronic calibration eliminates all adjustments to provide a lower cost of ownership.

Features:
5 measurement functions
Up to 90 readings/s
Electronic calibration
100 nanovolt resolution

Description:
The HP 3478A is a low cost, full function, reliable DMM for system measurements. Selectable 3'/2 to 5 1/2 digit resolution and 5 autoranging functions offer flexibility in automated testing. The HP 3478A measures dcV, true rms acV, 2- and 4-wire resistance, and dc and ac current. Simple, fast electronic calibration eliminates all adjustments to provide a lower cost of ownership.

Features:
5 measurement functions
Up to 90 readings/s
Electronic calibration
100 nanovolt resolution