1.3um Analog Lasers

Pin-out is type-1 for almost all 980nm, 14xxnm pump lasers, and some 1.3um analog lasers. Pin-out is type-2 for most 1.55um and 1.3um signal lasers (some signal lasers with wavelength locker, built-in modulator, special analog modulation, special temperature control would have special pin-out definition., some analog lasers have type-3 pin-out). See type-1 and type-2 pin-out definition diagram. It is easy to figure out the pin-out type for any 14-pinout laser by laser controller (we use Newport laser controller).

Items: 121 of 21, per page
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart

    Prisma model 6473  6dBm 1310nm Transmitter.  With SC/APC fiber adapter. One module sample includes 2mW - 4mW laser P/N: FLD3F8CZ, as shown at 6th photo below; Another module sample includes laser P/N:  810608, as shown at last photo.

    We can remove laser from the transmitter module by desoldering machine with low-melting point solder, at extra $40 for the desoldering, testing, and packing work).  

    General description:
    The Model 6473 Family of Transmitters are designed to operate over a wide range of optical output powers and loss budgets. These transmitters can deliver analog and digital signals from 46 to 870 MHz and are available in PAL B/G, PAL D/K as well as NTSC configurations. Microprocessor control allows ease of installation and flexibility of application. The transmitter design includes an array of  contemporary capabilities, such as: low RF input level, broadcast and new media RF inputs and front panel serviceability, with three levels of performance (Standard, XL and XLS) available.

    • US$250.00

    Not rated yet
    Only 1 left in stock
  • Drag and drop me to the cart

    Prisma model 6473 10dBm 1310nm Transmitter. With SC/APC fiber adapter. With laser kbm# : 810609, as shown at last photo. 

    We can remove laser from the transmitter module by desoldering machine with low-melting point solder, at extra $40 for the desoldering, testing, and packing work). 

    General description:
    The Model 6473 Family of Transmitters are designed to operate over a wide range of optical output powers and loss budgets. These transmitters can deliver analog and digital signals from 46 to 870 MHz and are available in PAL B/G, PAL D/K as well as NTSC configurations. Microprocessor control allows ease of installation and flexibility of application. The transmitter design includes an array of contemporary capabilities, such as: low RF input level, broadcast and new media RF inputs and front panel serviceability, with three levels of performance (Standard, XL and XLS) available.

    • US$360.00

    Not rated yet
    Only 1 left in stock
  • Drag and drop me to the cart

    1310nm transmitter by Aurora. With SC/APC fiber connector with red dust cover. It includes a laser P/N: 21034576. We do not have exact full pdf specification for this model, but 1st and 2nd pdf links below would provide some info. "06" in model number means 6dB link loss is allowed (6dB optical budget, output power would be 5.5 - 7dBm).

    We can remove laser from the transmitter module by desoldering machine with low-melting point solder, at extra $40 for the desoldering, testing, and packing work).  

    General Description:
    The Aurora AT3300 series 1 GHz 1310nm Transmitters provide increased bandwidth capacity for the expanding service demands of HDTV, VoIP, VOD and high speed DOCSIS. These transmitters are ideal for broadcast and narrowcast applications for optical transport and are offered in four series of models: (1) AT33xxG-N-1 transmitters (''standard'' performance models with a single RF input), (2) AT33xxG-N-2 transmitters (''standard'' performance models with dual RF inputs), (3) AT33xxG-A-2 transmitters (''standard'' performance models with dual RF inputs and AGC circuitry), and (4) AT33xxG-E-1 transmitters (''enhanced'' performance models with a single RF input).

    The AT3300 series transmitters with ''standard'' performance are available, as noted above, with either a single 46 to 1002 MHz RF input or a dual RF input version for combining separate broadcast and narrowcast inputs within the transmitter, while the dual input version is designed to provide 50 dB isolation between the narrowcast and broadcast inputs to protect against NC crosstalk on adjacent transmitters via the RF drive network. An AGC option, available for the dual input version, compensates for variations in the RF input level to the transmitter to maintain constant transmitter output RF drive level to the laser.

    All AT3300 series transmitters with ''standard'' performance are offered in different models with link losses ranging from 3 to 12 dB, while transmitters with ''enhanced'' performance are offered in different models with link losses ranging from 3 to 15 dB.

    High density packaging enables network operators to install up to 14 transmitters per 3RU chassis, all of which can be monitored remotely or locally from the power supply module. Additionally, the compact single-width module design can be plugged in either the front or rear of the CH3000 3RU chassis to optimize equipment installation and operating conditions.

    The compact design minimizes rack space requirements in headends or hubs and enhances deployment of traditional HFC, passive HFC and fiber to the home (FTTH) networks.
    ------------------------------------------------------------


    Features
    • Link loss budgets available from +3 to +12 dB (+3 to +15 dB for ''enhanced performance'' models)
    • 46–1002 MHz RF bandwidth
    • Enables very high rack density (14 transmitters per 3RU chassis)
    • Occupies only one full-depth slot
    • +15 dBmV/channel RF input drive level
    • Optional second port for narrowcast input (with or without AGC) on ''standard performance'' models
    • Superior flatness, ±0.5 dB
    • Front access –20 dB input test point
    • Front panel laser On/Off interlock switch
    • True dynamic Plug and Play
    • Open standard TCP/IP SNMP support
    • Local and remote status monitoring features
    • Local and remote RF level control and alarm level settings

    • US$65.00

    Not rated yet
    Only 1 left in stock
  • Drag and drop me to the cart

    1310nm transmitter by Aurora. With SC/APC fiber connector with red dust cover. It includes a laser P/N: 10031307. We do not have exact full pdf specification for this model, but 1st and 2nd pdf links below would provide some info. "08" in model number means 8dB link loss is allowed (8dB optical budget, output power would be 7.5 - 9dBm).

    We can remove laser from the transmitter module by desoldering machine with low-melting point solder, at extra $40 for the desoldering, testing, and packing work).  

    General Description:
    The Aurora AT3300 series 1 GHz 1310nm Transmitters provide increased bandwidth capacity for the expanding service demands of HDTV, VoIP, VOD and high speed DOCSIS. These transmitters are ideal for broadcast and narrowcast applications for optical transport and are offered in four series of models: (1) AT33xxG-N-1 transmitters (''standard'' performance models with a single RF input), (2) AT33xxG-N-2 transmitters (''standard'' performance models with dual RF inputs), (3) AT33xxG-A-2 transmitters (''standard'' performance models with dual RF inputs and AGC circuitry), and (4) AT33xxG-E-1 transmitters (''enhanced'' performance models with a single RF input).

    The AT3300 series transmitters with ''standard'' performance are available, as noted above, with either a single 46 to 1002 MHz RF input or a dual RF input version for combining separate broadcast and narrowcast inputs within the transmitter, while the dual input version is designed to provide 50 dB isolation between the narrowcast and broadcast inputs to protect against NC crosstalk on adjacent transmitters via the RF drive network. An AGC option, available for the dual input version, compensates for variations in the RF input level to the transmitter to maintain constant transmitter output RF drive level to the laser.

    All AT3300 series transmitters with ''standard'' performance are offered in different models with link losses ranging from 3 to 12 dB, while transmitters with ''enhanced'' performance are offered in different models with link losses ranging from 3 to 15 dB.

    High density packaging enables network operators to install up to 14 transmitters per 3RU chassis, all of which can be monitored remotely or locally from the power supply module. Additionally, the compact single-width module design can be plugged in either the front or rear of the CH3000 3RU chassis to optimize equipment installation and operating conditions.

    The compact design minimizes rack space requirements in headends or hubs and enhances deployment of traditional HFC, passive HFC and fiber to the home (FTTH) networks.
    ----------------------------------------------------------------


    Features
    • Link loss budgets available from +3 to +12 dB (+3 to +15 dB for ''enhanced performance'' models)
    • 46–1002 MHz RF bandwidth
    • Enables very high rack density (14 transmitters per 3RU chassis)
    • Occupies only one full-depth slot
    • +15 dBmV/channel RF input drive level
    • Optional second port for narrowcast input (with or without AGC) on ''standard performance'' models
    • Superior flatness, ±0.5 dB
    • Front access –20 dB input test point
    • Front panel laser On/Off interlock switch
    • True dynamic Plug and Play
    • Open standard TCP/IP SNMP support
    • Local and remote status monitoring features
    • Local and remote RF level control and alarm level settings

    • US$60.00

    Not rated yet
    Only 1 left in stock
  • Drag and drop me to the cart

    We opened 14dBm LM-14LD, 550A/860D transmitter system, we found Ortel 1610B analog laser inside. With SC/APC fiber connector. We cannot find exact pdf specification for 1610B laser. See similar laser model specification at 1st 2 pdf links below. 1610B is enhanced version of 1610A. 1612 model has higher bandwdith than 1610 model. See transmitter new model info at last pdf links below. You can either buy whole system or only buy laser (we will remove laser for you to save shipping cost). 

    Options: 16mW 1610B laser to be removed from 12dBm LM-12LD 550A/860D, 16mW 1610B laser to be removed from 12dBm LM-12 550A/860D.

    • US$270.00

    Not rated yet
  • Drag and drop me to the cart
    For analog CATV, fiber pigtail, 14 pin butterfly, TEC. With 900um-buffered fiber, without fiber connector. The 900um buffer is sticky and is not so easy to remove by simple stripper, or you can remove several short lengths (remove only short length each stripe). You can stripe faster if use heating-type striper.
    • US$58.00

    Not rated yet
    Only 1 left in stock
  • Drag and drop me to the cart
    For analog CATV application. 1270-1350nm. With FC/APC single-mode fiber connector, 900um-buffered fiber. 8-pin MINI-DIL package, straight leads. You can find more info from pdf datasheet link below.We tested 3 random selected samples of FC/APC version of store product code OSC-LDS-A1300-011G at our lab, all got 1.0mW output at about 37mA or 35mA, 1.2V.
    • US$37.00

    Not rated yet
    Only 4 left in stock
  • Drag and drop me to the cart
    For analog CATV application. 1270-1350nm. With FC/APC single-mode fiber connector, 900um-buffered fiber. 8-pin MINI-DIL package, straight leads. You can find more info from pdf datasheet link below.We tested 3 random selected samples of FC/APC version of store product code OSC-LDS-A1300-011G at our lab, all got 1.0mW output at about 37mA or 35mA, 1.2V.
    • US$32.00

    Not rated yet
  • Drag and drop me to the cart
    For analog CATV application. 1270-1350nm. With SC/APC single-mode fiber connector, 900um-buffered fiber. 8-pin MINI-DIL package, straight leads. You can find more info from pdf datasheet link below.We tested 3 random selected samples of FC/APC version of store product code OSC-LDS-A1300-011G at our lab, all got 1.0mW output at about 37mA or 35mA, 1.2V.
    • US$26.00

    Not rated yet
  • Drag and drop me to the cart
    For analog CATV application. 1270-1350nm. With SC/APC single-mode fiber connector, 900um-buffered fiber. 8-pin MINI-DIL package, straight leads. You can find more info from pdf datasheet link below.We tested 3 random selected samples of FC/APC version of store product code OSC-LDS-A1300-011G at our lab, all got 1.0mW output at about 37mA or 35mA, 1.2V.
    • US$7.00

    Not rated yet
  • Drag and drop me to the cart

    For analog CATV application. 1270-1350nm. With FC/APC single-mode fiber connector, 900um-buffered fiber. 8-pin MINI-DIL package, straight leads. You can find more info from pdf datasheet link below. The photoa at left were taken from A370-10B with SC/APC connector. Actual device is with FC/APC fiber connector and mistakenly marked as A370-10F rather than A370-10G.

    • US$33.00

    Not rated yet
  • Drag and drop me to the cart
    For analog CATV application. 1270-1350nm. With FC/APC single-mode fiber connector, 900um-buffered fiber. 8-pin MINI-DIL package, straight leads. You can find more info from pdf datasheet link below.We tested 3 random selected samples of FC/APC version of store product code OSC-LDS-A1300-011G at our lab, all got 1.0mW output at about 37mA or 35mA, 1.2V.
    • US$37.00

    Not rated yet
  • Drag and drop me to the cart
    For analog CATV application. 1270-1350nm. With FC/PC single-mode fiber connector, 900um-buffered fiber. 8-pin MINI-DIL package, straight leads. You can find more info from pdf datasheet link below.We tested 3 random selected samples of FC/APC version of store product code OSC-LDS-A1300-011G at our lab, all got 1.0mW output at about 37mA or 35mA, 1.2V.
    • US$32.00

    Not rated yet
  • Drag and drop me to the cart

    For analog CATV application.  Operating output power >2mW at Ith + 40mA. 1300-1310nm.  With FC/APC single-mode fiber connector, 900um-buffered fiber.  4-pin Coaxial package, You can find more info from pdf datasheet link below.

    1931 Uncooled Coaxial DFB Laser
    The 1931 uncooled coaxial DFB laser offers a low cost solution for linear fiber optic links. These components may be cooled with external thermoelectric coolers for high stability, or run without TECs for low power consumption. The DFB laser builds on EMCORE's long history of high performance designs for CATV, wireless, and high speed digital applications. The laser diodes, isolator, and monitor photodiode are packaged in a compact coaxial assembly for flexible integration into various transmitter configurations.

    Features
    •  Linear DFB laser design
    •  Bandwidth > 2.7 GHz

    Applications
    •  Video signal distribution in HFC and FTTx nodes
    •  High linearity, low power fiber links
    •  MPD, isolator
    •  Low power consumption

    • US$129.00

    Not rated yet
    Only 6 left in stock
  • Drag and drop me to the cart
    Single mode 900um-buffered fiber (9/125um) without fiber connector. 4-pin electrical interface. There are 2pc in each product packing case, the price is only for 1pc.
    • US$17.50

    Not rated yet
  • Drag and drop me to the cart

    Single mode 900um-buffered fiber (verified under fiber scope) with SC/APC fiber connector. 4-pin electrical interface. There are 10pc in each product packing paper box. "Pass analog 8km" is marked on product paper box (see 7th photo below), so we believe they were designed for analog application.

    • US$18.00

    Not rated yet
  • Drag and drop me to the cart

    Single mode 900um-buffered fiber (verified under fiber scope) with SC/APC fiber connector. 4-pin electrical interface. There are 10pc in each product packing paper box. "Pass analog 8km" is marked on product paper box (see 7th photo below), so we believe they were designed for analog application.

    • US$12.00

    Not rated yet
  • Drag and drop me to the cart

    For analog CATV application. With SC/APC single-mode fiber connector, 900um-buffered fiber. SMF is verified under fiber scope at our lab. 14-pin butterfly package, straight leads. 

    The specification of 1st pdf link below only shows max output power 10dBm with SLV5410-QD (D-series). The manufacture test data (including major parameter specification) at last 3 pdf links below show output power is 12dBm for this SLV5410-QF model (F-series). 

    For P/N: SLV5410-QF/HL1-343, we have checked all manufacture test data of 19 samples, the actual wavelength data are from 1343.1 to 1344.2nm at 25 C temperature. To achieve nominal wavelength 1343.76nm, you can adjust temperature, as shown at "Manufacturer test data of sample 1", "Manufacturer test data of sample 2", "Manufacturer test data of sample 3" pdf links below. 

    For P/N: SLV5410-QF/HL1-322, we have checked all manufacture test data of 23 samples, the actual wavelength data are from 1321.7 to 1322.9nm at 25 C temperature. You can adjust temperature to achieve nominal wavelength 1322.42nm. See 3-sample manufacturer test data at "Manufacturer test data of sample 4" pdf link below. 

    For P/N: SLV5410-QF/HL1-323, we have checked all manufacture test data of 16 samples, the actual wavelength data are from 1322.9 to 1324.2nm at 25 C temperature. You can adjust temperature to achieve nominal wavelength 1323.59nm. See 3-sample manufacturer test data at last pdf link below.

    • US$266.00

    Not rated yet
  • Drag and drop me to the cart

    For analog CATV application. With SC/APC single-mode fiber connector, 900um-buffered fiber. SMF is verified under fiber scope at our lab. 14-pin butterfly package, straight leads. 

    The specification of 1st pdf link below only shows max output power 10dBm with SLV5410-QD (D-series). The manufacture test data (including major parameter specification) at last 3 pdf links below show output power is 12dBm for this SLV5410-QF model (F-series). To achieve nominal wavelength 1343.76nm, you can adjust temperature, as shown at last 3 pdf links below.

    • US$200.00

    Not rated yet
    Only 4 left in stock
  • Drag and drop me to the cart

    Description
    • The DFB-1310-BF-xx-Ax-xx DFB laser modules are designed for forward-path CATV applications. The modules are designed to incorporate high output power while maintaining high linearity. The devices feature standard pin assignments (compatible with OC-48).
    •  The modules are excellent sources for use in CATV systems incorporating both PAL-D, with 60 channel loading, and NTSC, with up to 77 channels. The combination of high performance and very reasonable price make these modules the most cost effective CATV transmitter solutions in the industry.

    Features
    •  Standard OC-48 pin compatibility
    •  Negative bias
    •  Optimized for PAL-D and NTSC channel counts
    •  Output power up to 22 mW
    •  Meets GR 468 reliability specifications

    Applications
    •  CATV forward-path
    •  1310-nm broadcast and point-to-point applications

    • US$250.00

    Not rated yet
  • Drag and drop me to the cart

    Description
    • The DFB-1310-BF-xx-Ax-xx DFB laser modules are designed for forward-path CATV applications. The modules are designed to incorporate high output power while maintaining high linearity. The devices feature standard pin assignments (compatible with OC-48).
    •  The modules are excellent sources for use in CATV systems incorporating both PAL-D, with 60 channel loading, and NTSC, with up to 77 channels. The combination of high performance and very reasonable price make these modules the most cost effective CATV transmitter solutions in the industry.

    Features
    •  Standard OC-48 pin compatibility
    •  Negative bias
    •  Optimized for PAL-D and NTSC channel counts
    •  Output power up to 22 mW
    •  Meets GR 468 reliability specifications

    Applications
    •  CATV forward-path
    •  1310-nm broadcast and point-to-point applications

    • US$235.00

    Not rated yet
Bestsellers
  • Drag and drop me to the cart
    • US$7.00

    Not rated yet
    Add a different product to compare
  • Drag and drop me to the cart
    • US$37.00
    Only 4 left in stock

    Not rated yet
    Add a different product to compare
  • Drag and drop me to the cart
    • US$270.00

    Not rated yet
    Add a different product to compare
  • Drag and drop me to the cart
    • US$266.00

    Not rated yet
    Add a different product to compare