156x-1610nm L-band SMF Laser

Laser with SMF output in L-band wavelength (1570 - 1610nm). Pin-out is type-1 for almost all 980nm, 14xxnm pump lasers. Pin-out is type-2 for most 1.3um and 1.55um signal lasers (some signal lasers with wavelength locker, built-in modulator, special analog modulation, special temperature control would have special pin-out definition., some analogue lasers have type-3 pin-out). See type-1 and type-2 pin-out definition diagram. It is easy to figure out the pin-out type for any 14-pinout laser by laser controller (we use Newport laser controller).

Items: 1–2 of 2, per page
Drop items here to shop
Product has been added to your cart
Checkout
  • 1600.17nm (measured 1603.4nm) 30mW SMF transmitter with 30mW laser module and laser driver. Laser model: SLT5412-DX/TB5-E735. Without test sheet
     
    Drag and drop me to the cart
    1600.17nm (measured 1603.4nm) 30mW SMF transmitter with 30mW laser module and laser driver. Laser model: SLT5412-DX/TB5-E735. Without test sheet
    The transmitter board P/N: 699-7200-0140. It include 30mW (operating power) laser. The 2-page test sheet in the last two photos below is only from a sample. See laser similar datasheet and reliability report in the 1st and 3rd pdf links below. The "X" in the model number SLT5412-DX/TB5-E735 means 30mW operating power output. With SM fiber pigatail with FC/PC connector(Warning: 1st pdf datasheet link is for PMF rather than SMF laser).With telecom driver board. The driver board includes HY6510 laser driver module with up to 622Mb/s modulation, see datasheet in the 2nd pdf link below.It is type-2 pinout, STL5412 pinout should be exactly same as SLT5410, SLT5416. We use E-tek laser controller to test samples of SLT5412 (and also SLT5410, SLT5416, and also almost all other signal lasers). See E-tek laser controller pinout at the last photo below.
    • US$420.00

    Not rated yet
    Only 3 left in stock
  • 10Gb directly modulated laser. 1535.036nm, 1555.747nm, 1600.6nm, or 1604.026nm. 10Gb/s 120km Telecom CMLTM 13pin-GPO Butterfly Transmitter. AZNA or Finisar P/N: DM80-01-1-xxxx-4-LC,
     
    Drag and drop me to the cart
    10Gb directly modulated laser. 1535.036nm, 1555.747nm, 1600.6nm, or 1604.026nm. 10Gb/s 120km Telecom CMLTM 13pin-GPO Butterfly Transmitter. AZNA or Finisar P/N: DM80-01-1-xxxx-4-LC,

    With GPO male RF interface. With 900um tube fibers with LC/PC fiber connectors. See datasheet at the 1st two pdf links below. AZAN was merged into Finisar. Made in mostly in 2006 (except 2pc are in 2007). 

    PRODUCT FEATURES
    • High Performance CMLTM
    • Supports multi-bit-rate application, from 9.95Gb/s to 11.1Gb/s
    • Supports link length up to 120km without DCM
    • 4-7dBm modulated output power
    • Case temperature range -5°C to 75°C
    • Supports application with and without FEC
    • TDM, DWDM single channel
    • Covers ITU-T C- and L-band channels (1527.773nm to 1605.744nm) 

    Wavelength and P/N: 1535.036nm, AZAN P/N: DM80-01-1-9530-4-LC; 1600.6nm, FINISAR P/N: DM80-01-1-8730-4-LC; 1604.026nm, AZAN P/N: DM80-01-1-8690-4-LC. 

    With GPO/SMP male interface. You can use GPO(SMP)-female to SMA-female adapter (Store product code: EIP-RFADAPTERS-017D) to convert to SMA interface. SMA can work up to 18GHz.

    • US$780.00

    Not rated yet
Bestsellers