Optic Loss Test Kit

9XT Optical source driver: Verified working. Key switch is missing but it is always at ON position. 

Laser source module: 1710-1300-W. 1.3um laser. -17dBm SMF output. With biconic adapter, as shown at 3rd photo.  Note: The source module is not working. 

Optic power meter: With biconic adapter, as shown at last photo. OPM wavelengths: 850/1300/1550nm. , include 9v battery. OPM power tested data is correct by comparing another OPM. 

You can buy laser source driver or optical power meter separately.

Optic power meter M310A:  -70dBm to +10dBm. with a ST adapter. OPM wavelengths:  850/1300/1550nm. Include 9v battery and case.

With 100x fiber scope with ST-adapter.  

With user manual (operating instructions).

(This following item is sold: Fotec handheld 0.85/1.3um light source, model: S370. With ST adapter. With 3rd-party wall-mount power supply.)

We can ship without carring case to save your shipping cost.

OPTICAL RETURN LOSS TEST SET,  1550 +/-15 nm.  Reflection rabge: 0 to -70 dB. Output>-6.5dBm.  With FC/APC fiber adapter, and internal fiber connector looks quite clean under fiber scope for female connector. Built-in Ni-Cd rechargeble battery. AC power adapter/charger is missing. We will include one 9 V alkaline battery backup. For long term use, you may use your own 9V Ni-MH rechargeable battery.

We have tested on a JDS FC/APC-FC/UPC SMF jumper, got back reflection -14.86dB from non-terminated FC/UPC connector (see 7th photo below), considering there is near 0.1dB FC/APC connector loss, this result matches theoretical prediction of about 3.4% (-14.7dB) reflection from bare glass very well. We also tested on a FC/APC to near-100%-reflector jumper(Store Product Code: OFC-REFL-REF-005C), got back reflection -0.46dB (see last photo), considering there is about 0.1dB FC/APC connector loss, this result matches theoretical prediction very well.
Note: since internal connector is FC/APC and  back-reflection of its open end would be less than -70dB, so we used this as reference of zero back reflection, and press "ZERO" before RL test.

EXFO BRT tester has better accuracy than FIS ORL tester, due to better specification, less PDL, better reference method. The reference method is easier and cheaper, since it does not require goldtip reflector.

Calibrated in 2004 by third-party. It comes with 1.31/1.55um laser sources and 850/1310/1550nm power meter. PN:9029-0000. This test kit can do return loss, insertion loss, optical power test. It can be also used as 1.3um and 1.55um laser sources. 

ST adapter at receiver, FC/APC adapter at optic source. A gold tip near-100% reflector jumper with FC/APC connector is attached(from Store Part #: OFC-REFL-REF-005C), see last photo, it is brand new and made by third-party. With a battery recharger for NiCd batteries. With 4 used NiCd rechargeble batteries (We may provide unused better Ni-MH rechargeable batteries instead, but the charger adapter is not for this type of battery. Let us know your preference). With carrying case. Original price $1995 from FIS.

It comes with 1.31/1.55um laser sources and 850/1310/1550nm power meter. PN: 9029-0000. Economical solution, this test kit can do return loss, insertion loss, optical power test. It can be also used as 1.3um and 1.55um laser sources. 

ST adapter at receiver. FC/APC adapter at optical source, and internal fiber connector looks quite clean under fiber scope for female connector. 

AC power adapter/charger is missing. We include 4 used 1.5V NiMH rechargeable batteries(see 5th photo below). A gold tip 100% reflector jumper with ST connector is attached(see 7th photo). There are also a ST-ST SMF jumper, two ST-ST MMF jumpers(they look like 62.5/125um fibers under fiber scope), one ST fiber adapter, a user manual (same as pdf link below). With carrying case. Original price $1995 from FIS. 

We have tested on a JDS FC/APC-FC/UPC SMF jumper, got back reflection -14.8dB or -14.7dB from non-terminated FC/UPC connector (see last photo), this result matches theoretical prediction of about 3.4% (-14.7dB) reflection from bare glass.
Note: Before ORL test, we applied gold tip near-100% reflector jumper with FC/APC connector(Store Product Code: OFC-REFL-REF-005C), and pressed "ZERO" left arrow button until display shows -0.5dB.

Optical power meter gives same result as our HP81525A optical head at 1550nm -3dBm laser input.

It comes with 0.85um and 1.31um LED sources and 850/1310/1550nm power meter. PN:9039-0000. This test kit can do insertion loss(0.85/1.3um), optical power test. It can be also used as 0.85um and 1.31um light sources. Majorly designed for multimode fiber when used as light source and in insertion loss test. 

With a battery recharger for NiCd batteries. With 4 used NiCd rechargeable batteries (We may provide unused better Ni-MH rechargeable batteries instead, but the charger adapter is not for this type of battery. Let us know your preference). With carrying case. With user's manual in paper. With certificate of calibration. 

ST adapter at receiver and at optic source. We can provide a ST-SC SMF jumper and a ST-FC SMF jumper for free(tell me your requirement, and also if you need adapter), then you can also test over SC or FC connectorized SMF jumper.

It comes with 0.85um LED source(model: FOS-121-32) and 780/850/1300/1310/1550nm power meter(FOT-12A).   This test kit can do insertion loss(0.85um), optical power test. It can be also used as 0.85um light source.  

With used 9V battery for both testers. With one power adapter for power meter.  With carrying case. With instruction manual in paper.  

ST adapter at power meter and at optic source. We can provide a ST-SC SMF jumper and a ST-FC SMF jumper for free(tell me your requirement, and also if you need adapter), then you can also test over SC or FC connectorized SMF jumper.

See power meter specification at 1st pdf link below. See optic source specification at 2nd pdf link.