Instrument Enclosure/Case

3 fiber spools were removed by us. The last photo is for another test box with 3 fiber spools. 

You can install 3 fiber spools(only accept 4-inch net-height low-version spool, it cannot accept more than one 8-inch net-height high-version spool). It includes some mechanical parts to support fiber spools, we cannot guarrantee all the oiginal screws are included. We do not have time to install fiber spools for you. 

You may also use it for other project.

It is large metal enclosure. Previouse owner installed 2 fiber spools inside by strong double-side tape. 2 fiber spools were removed by us. Size(WxDxH):48x38x27cm. 

You may install 2 or even 3 fiber spools. It only accept 4-inch net-height low-version spool, it cannot accept more than one 8-inch net-height high-version spool). It does no includes any mechanical parts to support fiber spools. We do not have time to install fiber spools for you. 

You can also use it for other project.

Extrusion and front /rear panels material: Aluminum
Top/bottom covers material: Steel

Following is small enclosure size info from supplier.
Front panel, Rear panel, Internal size (mm)
H x L,   H x L,  h x lxt
64 × 203.5, 64 × 203.5, 62 × 179.5 × 180

Color: Gray. Color configuration is CFG1. See actual color and shape at the 2nd photo below (this photo was taken from 200mm-deep sample rather than from actual 180mm-deep enclosure)

Note: The dimensions shown in the table are only for reference (maybe exist ± 0.5mm dimensions variation).

See more info at pdf link below. Correction:  The actual standard panel thickness is 1.2mm, cover thickness is near 1.2mm.

Tip:
It requires special tool to remove plastic bezel from enclosure, otherwise the latch of bezel might be damaged. If you do not have such tool, please use large flat-tip screw driver. To make this removing more smoothly and to protect bezel, please wrap some thin foam over the flat tip of screw driver.

Extrusion and front /rear panels material: Aluminum
Top/bottom covers material: Steel

 Following is small enclosure size info from supplier.
Front panel, Rear panel, Internal size (mm)
H x L,   H x L,  h x lxt
64 × 203.5, 64 × 203.5, 62 × 179.5 × 200

Color: Gray. Color configuration is CFG1. See actual color and shape at the 2nd photo below (this photo was taken from actual 200mm-deep sample)

Note: The dimensions shown in the table are only for reference (maybe exist ± 0.5mm dimensions variation).

See more info at pdf link below. Correction:  The actual standard panel thickness is 1.2mm, cover thickness is near 1.2mm.