Circulator
-
Mux/demux module, including 3-port circulator(JDS model: CR5500), 1558.45nm FBG. There are one 1x2, and one 1x1 fiber component in black body, we believe they are thin film filters. Model: WD1503M/D-SS1C. FC/APC adapters. You can also re-use the circulator for other application.Only 1 left in stock -
Only 1 left in stock250um-coating SMF-28 9/125/250um fiber pigtails on all ports without connectors.
-
250um-coating 9/125/250um SMF-28 fiber pigtails on all ports without connectors. The 2nd pdf link below is test sheet from similar model as reference. -
250um-coating 9/125/250um SMF-28 fiber pigtails on all ports without connectors. The 2nd pdf link below is test sheet from similar model as reference.Only 4 left in stock -
250um-coating 9/125/250um SMF-28 fiber pigtails on all ports without connectors. The 2nd pdf link below is test sheet from similar model as reference. -
1.3um 3-port circulator. With one FC/PC connector. JDS P/N:CR2300-3P-PX1. Without actual test sheet.900um-buffered SMF-28 fiber on all ports, with one FC/PC connector only on port 2. With test sheet at 1295nm (isolation data over - 1330nm). The photos of test sheets below are only from other samples. It does not come with actual test sheet.Only 4 left in stock -
Only 2 left in stockWith 3 FC/APC connectors. 900 µm loose-tube fiber (HI 1060 fiber). 1-meter long. Powe handling 300mW.
See specification and test data at last 2 pdf links below. See general specification at the 1st pdf link below.
-
Only 1 left in stockWith user manual, see pdf link below. See specification at page 9 of this pdf link.
This smart coupler includes optical circulator, optical switch, and optical tap power monitor. When you choose “Passive” at front panel (see 3rd photo below), you can use optical circulator passively and use optical switch manually.
With 3 SC/PC adapters at front panel.
The SmartCoupler system optical links into a single fiber bi-direcr"ional link. The existing links may be 1310nm or 15.50nm. Any transmission rate is supported. SmartCoupler (OC) systems automatically verify acceptable backreflection levels and provide protection against ' silent loopback' failures.
