Two 1.52-meter fibers with two LC/PC connectors at one end. The other end is one 6-degree-angled tube/ferrule only(tube no: FT-89), we measured the diameter, around 2.25mm, so it is not standard 2.5mm ferrule and you cannot use it in standard fiber adapter.

This is fiber tube assembly: parts to make optical filter or filter-based optical coupler. See the 1st pdf link below as an application example for 3dB coupler/splitter (JDS P/N: AC1100).

9/125/900um fiber (fiber core effective diameter: 9um, it is standard size). In most cases, it is Corning SMF-28 fiber(see example at AC0199 tap coupler, and another example at AC1100 3dB coupler ). Otherwise it is standard SM fiber of other makers compatible with SMF-28.

You can use it as two SM fiber pigtails. These fiber pigtails were cut from fiber jumper P/N: J-LCLC-A-004-JT.

Price is for one fiber tube assembly including two fiber pigtails.

We have tested about 20pc of FC/PC version of fiber pigtails/jumpers JDS P/N: J-FPFP-A-002-JT, J-FPFP-A-003-JT, J-FPFP-A-004-JT, J-FPFP-A-005-JT (similar model to J-LCLC-A-004-JT , except LC connector ) jumpers at 1.55um wavelength at our lab. RL of J-FPFP-A samples are verified <-50dB, typically around 55dB approximately. Average loss <0.08dB, and typical insertion loss is <0.1dB. So LC connector of J-LCLC-A-004-JT jumper should be equivalent to LC/UPC, since RL is <-50dB.

We have verified this fiber can fusion-splice with standard Corning SMF-28 well at low splice loss.

Manufacture date: around May 2001.