Dispersion: about -518ps/nm. With two SC/PC connectors.  It is majorly designed for TRUEWAVE fiber or other non-zero dispersion shifted fibers in L-band. You can also use for standard fiber if you do not care about dispersion slope. See the 1st pdf link for new model specification in L-band and 2nd pdf link for C-band model.

Approximate tested result in our lab: IL=2.83dB at 1.55um including one connector loss, length ~ 1.56km by OTDR (We did not adjust the refractive index to match this fiber index value. The refractive index may be slightly higher than standard fiber due to more Ge-doing in core, but it should be close). The length may be longer than tested value since our OTDR instrument might not be good to measure this type of fiber.

Maker: Lucent or OFS. (Lucent fiber division was sold as OFS later)


Notice for the buyers who would like to cut short piece of fiber for special project (One buyer already did this from a DCM sample, seems no problem):
In all Lucent/OFS DCM, there is soft glue over the fiber spools. The glue feels like very soft plastics, seems easy to take off. But fiber is fragile, when you take off the glue, fiber might be broken. This similar glue is widely used as protection material in fiber module, such as er-doped fiber spool.