Please choose and buy adapter individually.This adaptor set 2 includes following adapter numbers:2001, 2002, 2003 (905/906 series SMA, about 3.2mm internal diameter), 2004(fit 3.8mm ferrule, near 4mm internal diameter), 2005 (sealed cover), 2006, 2008(bare fiber), 2009(about 3.2mm internal diameter), 2010, 2011, 2012 (D4), 2013, 2014, 2015, 2016, 2017 (Biconic, 4pc), 2018, 2020(fit SMA connector, about 3.2mm internal diameter), 2021(FC), 2022(fit SMA connector, about 3.2mm internal diameter), 2025, 2026(fit 3.8mm ferrule, near 4mm internal diameter), 2027, 2028, 2029, 2030, 2031, 2032, 2033, 2034, 2035(fit 3.8mm ferrule, near 4mm internal diameter), 2036, 2039(fit SMA connector, about 3.2mm internal diameter), 2042, 2043, 2047, 2048,2058(SC).
The following info is a description from a seller only for reference, which includes different adaptors:
Manufactured by Photodyne Inc. of Newbury Park CA, this fiber optic adapter set features 22 different 1” diameter x 3/8” deep black plastic adapter caps numbered in the 2011-2048 series, each with 7/8” inside diameter mount threading. Each cap has a different top connector of varying diameter and material (plastic, aluminum, brass, zinc, steel), some threaded, some non-threaded. Included are three blank (no top connector) #2005 caps. The adapter caps are housed in a 13” wide x 6 1/8” deep x 1 ¾” high urethaned pine box with hinged and latching lid, and gray interior foam insulation. The bottom foam insulation is pre-cut for insertion of the adapters. The set has been used and appears to be in good overall condition, but is not complete- ten of the pre-cut adapter inserts in the bottom foam are empty. The bottom foam is showing some disintegration under the adapters from prior usage/age. The following adapters are included (with indication of top connector): #2001 (1/8” high x ¼” OD threaded plastic), #2003 (5/16” high x 6mm OD threaded brass), #2006 (7/16” high x 15mm OD threaded brass), #2008 (1 3/8” high (top ½” is ½ round) x 9mm OD non-threaded steel), #2009 (3/16” high x 4mm OD threaded brass), #2012 (1/4” high x 8mm OD threaded brass), #2017 (1/2” high x 10mm ID threaded plastic), #2018 (3/8” high x 5mm OD threaded brass), #2021 (3/16” high x 7mm OD threaded brass), #2022 (3/8” high x 7mm OD non-threaded plastic), #2026 (1/2” high x 7mm OD non-threaded plastic), #2027 (9/16” high x 8mm OD threaded zinc (RGB-style), #2031 (3/16” high x 5mm OD non-threaded brass (push/turn), #2035 (1/4” high x 5mm OD threaded brass), #2036 (1/8” high x 9mm OD threaded brass), #2039 (5/16” high x 5mm OD threaded brass), #2041 (1/2” high x 7mm OD non-threaded aluminum (push/turn), #2042 (3/16” high x 5mm OD threaded brass), #2043 (5/8” high x 10mm OD threaded brass), #2047 (3/16” high x 6mm OD non-threaded plastic), #2048 (1/2” high x 6mm OD non-threaded plastic), and an un-numbered adapter (1/2” high x 7mm OD non-threaded aluminum (push/turn). The set may be intended for adapting various fiber optic cables to Photodyne or similar format power meters.
