Oven temperature controller made by JDS. JDS model: 10101548
It includes TEC module model: CN76020. Single output with DC pulse/AC SSR. It also includes G240D25 Normally-Open Panel-Mount Solid-State Relay.
The CN76000 1/16 DIN controllers provide economical control for a wide variety of processes, including heating, cooling, and heat/cool. When used with the proper transmitters, these devices can also control pressure, flow, humidity, motion, or pH. The front panel is NEMA 2, 3R, and 12 rated for waterproof protection and is corrosion resistant.
The sophisticated design of the CN76000 incorporates the latest microprocessor and surface mount technology, compressing an unprecedented number of standard features into a compact 1/16 DIN package. The user can program control functions from the front panel; input types are DIP switch selectable. Multiple tuning modes allow the user to select from 3 standard tuning presets, manual tuning, or autotuning.
Standard features include self-diagnosis with fault indication. Non-volatile memory retains all process parameters when power is off, without battery backup. Settings for the optional alarm are configurable. The alarm action may be defeated on startup, or until the process value exceeds the alarm setpoint. The power interrupt feature will reset on power-up if the alarm condition no longer exists.
Other standard features include min/max storage and display, auto/manual control, percent output indication, ramp and soak operation, 4 user-selectable security levels with password protection, and jumper-selected 5 Vdc pulse output to drive external solid state relays. Optional features include RS485 communications, process recorder output, and 4-stage setpoint.
Feature of TEC module CN76020:
• Dual 4-Digit Display
• Adaptive Tuning
• Autotune PID, PID, or On-Off Control
• Thermocouple Input with 1° or 0.1° Resolution
• RTD Input with 1° or 0.1° Resolution
• Scalable Voltage and Current Inputs
• Displays in °F, °C, or Engineering Units
• Password Protection
• Front-Panel Programming
• Relay, DC Pulse, AC SSR, Voltage, or Current Output(s) Optional Features
• 4-Stage Setpoint
• Analog Process or RS485 Digital Output
• Tracking/Non-Tracking Alarms Additional Features
• Loop Break Protection
• Min/Max Indication
• Auto/Manual Operation
• Percent Output Indication
• Single-Segment Ramp and Soak
